|
|
|
| Alfa Laval / Tetra Pak stainless steel sanitary valve cluster for dairy products, milk, and beverages |
|
Stainless steel sanitary valve manifold cluster.
Composed of:
- 12 Mixproof valves | double seat valves.
Manufacturer | brand: Alfa Laval.
Mixproof valves or double seat valves are special sanitary valves used to keep two liquids completely separate.
- 7 SSV (Single Seat Valve) Valves | single seat valve.
Manufacturer | brand: Alfa Laval.
Single seat valve for industrial processes that require precise control of liquid flow and high hygiene standards.
- Pneumatic actuators.
- Feedback sensors.
- Stainless steel drain manifold.
- Stainless steel sanitary bases.
Valves and parts for the dairy industry (milk, yogurt, cheese), beverage industry (juices, soft drinks), pharmaceutical and cosmetics industry (sterile liquids), and general CIP processes. |
Brand:
Alfa Laval, Tetra Pak
|
|
|
|
|
|
Main suggestions:
|
|
 |
Brand: Alfa Laval
Horizontal stainless steel centrifuge separator for separating solids and liquids in food processes.
Manufacturer | brand: Alfa Laval.
Model: NX - 418.
Approximate capacity: 10,000 liters per hour.... |
|
|
 |
Brand: Alfa Laval
Separator centrifuge separator purify industrial oils.
Manufacturer | brand: alfa laval.
Model: mab 104.
Approximate capacity: 2,200 liters per hour.
To separate fine solids and other impurities.... |
|
|
 |
Brand: Alfa Laval
Bactofugal vertical centrifuge with automatic discharge for milk clarification.
Manufacturer: Alfa Laval.
Model: BB-10 HGV.
Approximate hydraulic flow rate: 10,000 L/H.
Approximate flow rate for bacteria removal: 5,000 L/H.
Year: 2017.... |
|
|
 |
Brand: Alfa Laval
Components: SEW-Eurodrive
Lobe pump in 316 stainless steel.
Manufacturer: Alfa Laval.
Motor: 7.5 Kw, manufacturer: Sew-Eurodrive.
Model: SRU4 / 055 / LS.
Year: 2017.
Voltage: 460 V.
Amperage: 12.30 A.
Three-phase.
Protection rating: IP 55.
R.P.M: 17... |
|
|
 |
Brand: Alfa Laval
Components: SEW
Lobe pump in 316 stainless steel.
Manufacturer's brand: Alfa Laval.
Motor: 11 kW.
Year: 2011.
Internal diameter of product inlet/outlet: approximately 77 mm 78 mm. Check photos of the caliper.
Positive test for 316 stainless steel reag... |
|
|
 |
Brand: Alfa Laval
Components: SEW
Lobe pump in 316 stainless steel.
Manufacturer's brand: Alfa Laval.
Motor: 7.5 kW.
Internal diameter of product inlet/outlet: approximately 46 mm 48 mm. Check photos of the caliper.
Positive test for 316 stainless steel reagent. Check pho... |
|
|
 |
Brand: Alfa Laval
Plate heat exchanger.
Stainless steel.
Brand: Alfa Laval.
Model: M3 - FHC.
Maximum working pressure: 1.0 MPa / 10.0 Bar.
Maximum working temperature: 110 ° C.
Volume: 3 L.... |
|
|
 |
Brand: Alfa Laval
Alfa Laval sanitary transfer pump
- Pontecia: 7.5 hp - 3 phases.
- Voltage: 220/380 V.
- A 19.1 / 11.1
- Hz 60
- 3,500 rpm... |
|
|
 |
Brand: Alfa Laval
Stainless steel cooling tank.
Brand: ALFA LAVAL.
Approximate capacity: 1000L.... |
|
|
 |
Brand: Alfa Laval
System for heating thermal fluid.
Brand: Alfa Laval, Aalborg.
Model: 25 - HO- 25M.
Year: 2009.
Thermal capacity: 2,500 Kcal / Hour.
Volumetric capacity: 2175 liters.
P.M.T.A: 150 Psig.
Hydrostatic Test: 225 Psig.
Category: 3.
... |
|
|
 |
Brand: Aalborg, Alfa Laval
Heater for industrial heating thermal fluid.
Brand: Alfa Laval Aalborg.
Model: 50 - HO - 50 M.
Process: Thermal fluid heater for propane refining.
Thermal capacity: - 5,000,000 KCAL/H
Volumetric capacity: 2960 Liters.
P.M.T.A - 300 ... |
|
|
 |
Brand: Alfa Laval
Stainless steel centrifugal pump.
Manufacturer | Brand: Alfa Laval.
Model: CRX 216 F.
Type: Sanitary.
Approximate flow rate: up to 10 m³/h.
Operated for 10 years.
Outlet: 2”.
The pump was used for transferring inverted sugar.
... |
|
|
 |
Brand: Alfa Laval
Skid-mounted centrifugal separator for cleaning oils from hydraulic and other similar systems.
Manufacturer: Alfa Laval.
Maximum capacity: 10.6 m³/h, depending on the product.
Model: MAB 206.
The equipment was recently overhauled and skid... |
|
|
 |
Brand: Alfa Laval
High-pressure piston homogenizer.
Manufacturer | Brand: Alfa Laval.
Model: SHL 25.
Maximum production capacity: up to 9,000 L/H at 250 bar pressure.
Refurbished.
Equipment with panel.
For the food, beverage, dairy, cosmetics, pharma... |
|
|
 |
Brand: Alfa Laval
Stainless steel centrifuge separator for separating animal blood phases.
Manufacturer | Brand: Alfa Laval.
Model: BPM 209.
Approximate capacity: 5,000 liters per hour.
For separating plasma and hemoglobin.... |
|
|
 |
Brand: Alfa Laval
Centrifugal separator for industrial oils.
Manufacturer | brand: Alfa Laval.
Model: MOPX 205.
Approximate capacity: 4,900 liters per hour.
For separating fine solids and other impurities.
With panel.... |
|
|
 |
Brand: Alfa Laval
Stainless steel centrifuge for food processing such as juice, beer and wine production.
Manufacturer | brand: Alfa Laval.
Model: VNPX.
Approximate capacity: 2,400 liters per hour.... |
|
|
 |
Brand: Alfa Laval
Automatic centrifugal separator.
Manufacturer: Alfa Laval.
Model: MAPX-207.
With heater, vacuum pump, mug filter, 220 / 380 / 440 V transformer, control panel and waste tank.
For treatment of mineral oils in purification, clarification, d... |
|
|
 |
Brand: Alfa Laval, Endress Hauser, Endress+Hauser, Inox Biaso, Nordix
Stainless steel jacketed surge tank/mixer.
Manufacturer | Brand: Inox Biaso.
Approximate capacity: 2,000 liters.
Tank agitator with a 7.5 HP motor.
With a 3 HP Nordix lobe pump.
With a 20 HP Alfa Laval self-priming centrifugal pump.
... |
|
|
 |
Brand: Despurifil
Industrial Reverse Osmosis Water Purification System.
Manufacturer | Brand: Despurifil.
Model: DES-806.
Approximate production: up to 8,000 liters.
Permeate production: 65%.
Inlet water conductivity: around 130 µs/cm.
Outlet water c... |
|
|
 |
Brand: Alfa Laval
Total area: 6213.00 m ²
built-up areas:
-milk reception platform: 77.20 m ²
-physical-chemical Laboratory: 14.56 m ²
-Microbiology Laboratory: 7.00 m ²
-manufacturing of cheese: m ²
156.60-circulation area: 36.34 m ²
-salting Chamber:... |
|
|
 |
Brand: Alfa Laval, KHS, Spirax Sarco
Components: Danfoss
COLD SYSTEM
BEVERAGE CHILLING UNIT;
INDIRECT EXCHANGE (ammonia heat exchange with the
solution, ethanol water; heat exchange solution with the drink). This equipment allows the CIP the
hot in the changing room next to the drink. is a KHS EQ... |
|
|
 |
Brand: Alfa Laval, Endress Hauser, Netzsch, Tetra Pak
Components: Danfoss
Complete line for pasteurization.
Brand: Tetra Pak.
Spiraflow.
Type: C - 118.
Capacity: 14,300 liters per hour.
Negative pressure deaeration tank.
Conductivity meter.
Brand: Endress Hauser.
Heat exchanger.
Brand: Alfa Laval... |
|
|
 |
Brand: Alfa Laval
Industrial centrifuge.
Brand: Alfa Laval.
Model: FESX - 512.
Capacity: 90 m³ / h.
Centrifuge for cornstarch, cassava, alcohol.
Quantity: 2 units.... |
|
|
 |
Brand: Alfa Laval, Ata
fermenteira 01 1500 l with reg. 2
01 fermenteira 1000 l with reg. 2
01 fermenteira 500 l with reg. 2 02 sanitary pumps 2hp/2
01 strip 2
01 alfalaval expansion tank with NG 2 s/refrig unit. (740L)
01 reception tank 300 l with reg. 2 with lid... |
Others suggested equipment for you:
|
|
 |
Brand: Fanem
- Fanem 345 climate chamber
- Stainless steel inner chamber
- Volume of 270 liters;
- Microprocessed control;
- Temperature: 10 ° to 75 ° C;
- Internal humidity controlled between 35% and 95%;
- Internal circulation of forced air;
... |
|
|
 |
Brand: Parmasol
Line of aerosols.
Parmasol liquid packing machine.
Parmasol retractor.
Parmasol Gas Packing Machine.
Several tables in stainless steel.
Fixing table of Parmasol machines.
Compressed air transfer pump.
Manual sealing machines.
... |
|
|
 |
Caterpillar type soap cutter.
With 21 teeth.
Some knives are missing.
Approximate knife length: 120 mm. (photo 2)
Total width of roller track: 155 mm. (photo 32)
Maximum width of roller track adjustment: 110 mm. (photo 20 and 28)... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
G.Mazzoni soap extruder intermediary.
- To extrude soap and preliminarily homogenize the dough.
- With 300 mm thread and cutting system.
- Measure 2,10 in length x 1,30 in width.... |
|
|
 |
Brand: Martinez taboada
Rinsers of flasks.
Brand: Martinez Taboada.
Makes up to 30 ml.
type Model. IFE 77.
Year. 1979.... |
|
|
 |
Stainless steel tank with internal cooling like tina.
220 litres capacity.... |
|
|
 |
The machine is part of a line for production of SOAP g. Mazzoni.
Mat set:
1.80 m mat press input.
2.00 m mat press output.
8.00 m mat cutter output.
7.50 m mat return refining extruder.
Note: Uses for transportation of product... |
|
|
 |
Brand: Prodismaq
- Packing machine for special products.
- Complete equipment built in stainless steel.
- It has 10 dispensing nozzles.
- The equipment was built as a special design, to pack flexible products that need support for conveyor belt, such as seru... |
|
|
 |
Stainless steel tank with 1,500 liters with motor and reducer.
- Tank size 1,20 x 1,20 x 3,14 x 1,40: 4 = 1582 liters = 1500 liters.
- Engine of 5vc 1725 rpm.
- Motor of 220 v / 380v / 440 v.... |
|
|
 |
Brand: Martinez taboada
Rinsers of vials and flasks.
Mrca: Martinez Taboada.
Makes up to 30 ml.
type Model. IFE 77.
Year. 1979.
the machine was being used all the time, is in a State of preservation as the machines of the perfume line.... |
|
|
 |
Brand: Promaler
Intermittent rotary cellofanching machine.
Brand: Promaler.
Prepared to operate fully closed cartridges.
Tape application with the following dimensions: 36 mm wide x 15 mm deep x 67 mm high.
Machine can be formatted for cigarettes, haysta... |
|
|
 |
Brand: Niva Pack
Components: Allen-Bradley
Vertical powder packer with volumetric system
Brand Name: Niva Pack.
Model: Absolut 350.
With pneumatic system of dosage of trough.
Machine with shape and thread.
Electric panel.
Allen Bradley PanelView 300 Micro Vision Panel.
Al... |
|
|
 |
Brand: Claumaq
Mixer.
Brand: Claumaq.
Stainless steel internal tank, shaft and spatula
Capacity: 100 kg.
Measures: 1.80 m x 1.00 m x 1.54 m.
... |
|
|
 |
Brand: IMSB, Rodopac
Automatic Capper with 6 nozzles.
Manufacturer: IMSB.
Model: TSB 25.06
6 Nozzles.
Measures 40 mm: 1.50 mm x 1.20 mm x 2.30 mm height.
Bondone and thread plastic bottles of 850 ml.
Capacity of 150 bottles per minute.
Weight 1,100 kg.
... |
|
|
 |
Components: SEW-Eurodrive
- Capacity: 2,000 L.
- Made of stainless steel.
- With complete panel:
- Siemens Logo 230 RC.
- Siemens switches.
- Organized picture.
- Inverter Sew Eurodrive Movitrac LT.
- System and pneumatic key.
- The mixer has two caps,... |
|
|
 |
Brand: Alsop
Stainless steel tank with simple jacket without mixer.
Brand: Alsop.
Capacity 200 liters.
Approximate measurements:
Tank height: 74.5 cm.
Height feet: 96.5 cm.
Diameter: 62 cm.... |
|
|
 |
Coater in stainless steel tablets.
Type: Drageadeira.
With retractable head.
For approximately 150 L.
With two spray coating.... |
|
|
 |
Brand: Jormary
Container with 1 container nozzle.
Brand: Jormary.
Model: ES1 Plus.
Stainless steel equipment, polished, including inside the lung funnel, facilitating hygiene.... |
|
|
 |
Brand: KHS
Components: Allen-Bradley
Flow Pack Packaging.
Brand: KHS
model: Pack y.
the machine was formatted for packing SOAP, before the format and size of the product is cradled 120 units/minute.
Features PLC Allen Bradley.
Simple mordent.
Part that comes in c... |
|
|
 |
Brand: Imarvil
Simple shirt tank in stainless steel and with mixer.
500 liters capacity.
Brand: Irmavil.... |
|
|
 |
Stainless steel tank.
1000 litre capacity.
With motor and reducer.... |
|
|
 |
Brand: Nocelli
Caterpillar type SOAP cutter with 25 knives.
Brand: Nocelli.... |
|
|
 |
Brand: Tirelli
Imported Italian bottling line, threading and labelling, consisting of:
-stainless steel pneumatic linear Tirelli Filling with 4 nozzles.
Model: GVJA.
-Rosqueadora stainless steel bottles, flasks for pneumatic Tirelli.
Model: NEBEL 2 t.... |
|
|
 |
Brand: Imarvil
Stainless steel washer bottles, use to sterilize the product packing container to be filled.
the liquid used to wash is alcohol.
Brand: Imarvil... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
Cylinder and Duplex extruder vacuum Homogenizer... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Camargo Industrial acts exclusively as an advertising platform. All information, photos, descriptions, conditions, and equipment compliance are the sole responsibility of the advertisers, and it is up to the buyers to verify their accuracy before purchasing. Camargo Industrial does not guarantee the accuracy, completeness, legal and technical availability of the advertised equipment.
Workplace safety with machinery: The platform does not perform inspections or certifications. The suitability of equipment to standards is the responsibility of sellers and buyers.
|
 |
| |
|
