|
|
|
| Hydraulic Press for 180 kgf / cm² RM Máquinas |
|
Hydraulic press.
- Brand: RM Machines.
- Equipment for high productivity, has automatic drawer exchange.
- Cycle adjustment from 10 seconds until required time.
- Operation with two molds per cycle.
- Cylinder size: 500 mm.
- Pressure: 180 kgf / cm².
- Dish size: 700 x 700 mm.
- Electric heating by resistors.
- Year: 2014.
- Machine operated for 3 years and this for 6 months.
- The company owns the preventive maintenance as well as
NR 12, which is performed by the manufacturer.
in optimal conditions of use.
|
Brand:
RM Máquinas
|
|
|
|
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing.
Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally.
The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment.
Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial.
Others suggested equipment for you:
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB
Sigma mixer, calender, extrusion and soap press.
Estimated production capacity: between 900 kg / h * up to 1,000 kg / h **.
Machines for the manufacture of soap composed of:
Sigma mixer for soaps.
Brand: G.Mazzoni.
Yield: 175 kg of bas... |
|
|
 |
Brand: Jones
Press Jones and conveyor belts... |
|
|
 |
Semi automatic baler for SOAP (without mold).... |
|
|
 |
Installers of air conditioning/production of ducts.
Production: bending and performs the functions with plates up to 1.5 mm.
year: 2014.
Model: Triplex (TDC flange, hip and clip).
In great condition used only 30 days of use for calibration.
... |
|
|
 |
Tacho inox.
Capacity: 2000 l.
Tacho inox.
Capacity: 660 l.
Tacho inox.
Capacity: 200 l.... |
|
|
 |
Brand: Mahnke
Press type C.
Brand: Mahnke.
Capacity: 80 tons.
Clutch: friction torque set (clutch / brake).
Valve safety category V.
suitable machine NR-12.
Year Purchased: 2008.... |
|
|
 |
Brand: ROMI
CNC lathe Romi Centur 30 D Multiplic.
Year: 2007.
Control: Fanuc.
Electric Tower 8 positions.
Among tips: 1,000 mm.
Against pneumatic point.... |
|
|
 |
Brand: ALLWERK
Conventional lathe.
Brand Name: ALLWERK.
Model: 8020.
Working in the industry.
Year 2012.
Equipped with digital ruler.
Maximum diameter 800 mm on bus, 600 mm on the car and 1.000 mm without the dig.
Useful length 2000 mm.... |
|
|
 |
Brand: Astembor
Components: Atos
Presses for Vulcanizing
working pressure bar 120
500 x 500 mm Plateau
Go to gap between plateaus 110 mm
Operation on both sides with aperture of the array table
Programming manual from time and degaseification via CLP-Acts... |
|
|
 |
Brand: Newton
Guillotine Newton.
Model: 4006.
Year: 2010.
Length: 4080 mm.
:
-Thickness steel (up to 420 N/mm ²): 6.5 mm
-Stainless Steel: 4.0 mm.
-aluminum: 6.5 mm.
voltage: 380 V-80 Hz.
installed power: 12 Kva.
Compressed air consumption: 300... |
|
|
 |
Brand: Pavan Zanetti
Blower.
Brand: Pavan Zanetti
Model: HDL 5L.
... |
|
|
 |
Brand: Nardini
Lathe.
Brand: Nardini.
Model: NDT-650 Nodus.
Dimensions: 2.90 m of bus.... |
|
|
 |
Brand: Jundiaí
C. type press
Mark: Jundiaí.
Capacity: 25 Tons
: Set friction Clutch (clutch/brake) conjugate.
Safety valve category v.
an adequate Machine NR-12.
Year of acquisition: 1995.... |
|
|
 |
Brand: Veker
CNC lathe
Brand: Veker.
Model: FEL-1640 ENC.
Tipping diameter: 410 mm.
Passage on the transverse carriage: 210 mm.
Distance between points: 910 mm.
Width of busbar: 260 mm.
ASA A2-5 shaft axle matrix.
Courses: (X-Z) mm 172/710... |
|
|
 |
2 thermal hydraulic presses for rubber
3 500 x 500 3 Dishes go 2 1/2 column 250 mm piston resistance heating
3 500 x 400 3 Dishes go 2 column "150 mm piston oil heating
500 mm Working Area (both)... |
|
|
 |
Brand: Blanchard
2 Retificas Blanchard.
Being one of 780 mm and 1000 mm.
Both are reviewed and in full operation.
Model: 5KR204A595.
Voltage: 220/440 V
... |
|
|
 |
Brand: Serra Bucher
Pliers suspended (soldering point).
Mark: Serra Bucher.
Model: TSC20011.
Year: 2009.
Power: 150 KVA.
Voltage: 440 VAC-60 hz.
Water flow: 16 litres per minute.
Portable, making it ideal for insulation and seals (several app... |
|
|
 |
Brand: ROMI
2 CNC lathes Centur 30 d.
A2-6 WING Head with hole for passage of 65.0 mm.
Equipped with electric Tower 8 horizontal tools.
pneumatic 210.0 mm.
Rotary Point manual advance.
Mach9 Year 2002 Command and another 2008.
... |
|
|
 |
Brand: Stankoimport
About Paral·lel the 3 guide stankoimport (kramatorsk) 1a665
year: 1984
height: 850 mm point
distance between centers: 16000 mm
max on bench: 1600 mm
max in motion: 1250 mm
pallet width: 1850 mm
flow between the tips: 40 ton
spindle mo... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing.
Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally.
The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment.
Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial.
|
 |
| |
|
Hydraulic Press for 180 kgf / cm² RM Máquinas
