|
Used machines for sale
Vacuum oil Exchange
>> Metal
|
|
|
|
|
| Vacuum oil Exchange |
|
Swing oil packaging, unused 2010 |
|
|
|
|
|
|
|
Main suggestions:
|
|
 |
Brand: Alfa Laval
Skid-mounted centrifugal separator for cleaning oils from hydraulic and other similar systems.
Manufacturer: Alfa Laval.
Maximum capacity: 10.6 m³/h, depending on the product.
Model: MAB 206.
The equipment was recently overhauled and skid... |
|
|
 |
Brand: G.Mazzoni, Mazbra Mazzoni
Complete structure of triplex bar soap extruder.
Composed of:
- Extruder for manufacturing bar soap.
Brand | manufacturer: G.Mazzoni.
Model: Triplex.
Approximate capacity: 3,000 kg/h of bar soap.
- Internal carbon steel liquid soap ... |
|
|
 |
Brand: CFS Slagelse A/S, Chiacchiera, FMC FoodTech, Gyrocompact Classic, New York Blower
2.185 / 5.000
Complete line for breaded meat protein products such as meat, CMS chicken and formatted or whole fish, pre-fried and frozen IQF.
Approximate productivity: 400 to 500 kg per hour depending on the product.
Year of the line: 2008.
... |
|
|
 |
Brand: Starnox
Stainless steel reactor.
Manufacturer / brand: Starnox.
Approximate capacity: 1800 liters.
Manufactured in 2006.
The equipment has operated very little and has been stored since 2012.
Reaction of mineral oil with chemical reagent.
I... |
|
|
 |
Brand: Alfa Laval
Automatic centrifugal separator.
Manufacturer: Alfa Laval.
Model: MAPX-207.
With heater, vacuum pump, mug filter, 220 / 380 / 440 V transformer, control panel and waste tank.
For treatment of mineral oils in purification, clarification, d... |
|
|
 |
Machine for candy to put in the bag
Mixer with two axles
complete line of Dairy
Tube
Packinghouse to 15 Kg
3-wire machine mechanical Stretcher screens with a maximum capacity of 40 cm, 4 x 4 Carousel machine
machine to make baby socks, ... |
|
|
 |
Cellar for complete fermentation and maturation of beers.
Composed of:
- Cylindrical conical storage tanks in sanitary stainless steel for glycol.
Approximate capacity: 3,000 liters.
Usable capacity: approximately 2,500 liters.
Quantit... |
|
|
 |
Brand: Liobras
Production freeze dryer | stainless steel floor with a mirrored sanitary finish.
Manufacturer | Brand: Liobras.
Model: LP510.
With approximately 200 hours of use.
For freeze-drying and dehydrating organic materials.
Equipment overhaule... |
|
|
 |
Brand: G.Mazzoni, H. Bremer, Mazbra Mazzoni, Mazzoni
Complete industrial line for manufacturing bar soap.
Composed of:
- Extruder for manufacturing bar soap.
Brand | manufacturer: G.Mazzoni.
Model: Triplex.
Approximate capacity: 3,000 kg/h of bar soap.
- Complete external vacuum tower... |
|
|
 |
Glycerin distillery.
New installation, never used.
Composed of:
- Iron plate tank.
Approximate capacity: 30,000 kg each tank.
Quantity: 3 units.
Internal part with coils for steam heating and agitation of the liquid by air coil from... |
|
|
 |
Brand: Jocar, Macafe
Equipment for roasting and grinding coffee.
- Coffee roaster.
Manufacturer | brand: Jocar.
Model: Ecological.
Year: 2000.
- Diesel boiler with cooler.
Approximate capacity: 60 kg at a time (3 cycles per hour).
Year: 2000.
- Ha... |
|
|
 |
Refining unit.
It has a capacity of 250 barrels per day of light oil, lubricants, naphtha, alcohols and industrial solvent treatment.
Its construction materials are special to withstand the most diverse conditions of corrosion and impurities.
... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
Complete line for the manufacture of glycerinated soap.
Composed by:
Extruder with 3 drawing boards.
Brand Name: Mazzoni.
Capacity: 500 kg / h.
Electrical panel of the line.
Feed pump.
Brand Name: Geremia.
With variator.
Br... |
|
|
 |
Brand: Laybolt, Selovac
Stainless steel tank.
500 litres capacity of double wall with thermal oil heating in 6 levels.
Tank for high vacuum and pressure up to 6 kg per cm square with agitator and with speed reducer.
With double mechanical seal for vacuum and pressur... |
|
|
 |
Brand: Alfa Laval
Total area: 6213.00 m ²
built-up areas:
-milk reception platform: 77.20 m ²
-physical-chemical Laboratory: 14.56 m ²
-Microbiology Laboratory: 7.00 m ²
-manufacturing of cheese: m ²
156.60-circulation area: 36.34 m ²
-salting Chamber:... |
|
|
 |
Brand: ETNA, Inadal, Polo Sul Máquinas
complete plant for the production of ice cream/stores
:
297.45 m2 built area: 245.60 m2
trademark boiler etna: year 2000 6000 kcal
tina tetra heating: year 2000 100 lts
tina tetra maturation: year 2000 3 x 100
tetra homogeinizador: year 2... |
|
|
 |
Brand: Dianna, Diedro, Tectron
Seasoning production line composed by:
-Tectron shrinking tunnel.
Year: 2013.
Model: BAN 20/35.
Supply voltage: 220 V-60 Hz.
current: 32 a.
-automatic Labeller Dihedral.
Model: RB-4 Duo.
Apply label and back label on cylindrical p... |
|
|
 |
Brand: Renamak
Automatic thermoforming machine for packaging and technical parts in PVC, PET, PS.
Manufacturer/brand: RenaMAK.
Model: TFC - 6585.
Year: 2011.
Approximate production: up to 16 cycles/minute.
It has control through PLC.
With material... |
|
|
 |
Brand: Cap Sealer
Vacuum induction Cap-Cap Sealer.
Applications:
-product: juice.
-Diameters of 38 mm closures and 43 mm.
-desired Production: up to 2,500 bottles per hour.
-sealing Capacity: up to 3,600 bottles per hour.
-franco Material: HDPE.
Mounte... |
|
|
 |
Brand: Alfa Laval
Industrial centrifuge machine Alfa Laval
model: MAB 106
coupled with vacuum pump, filter, heater and centrifugal press
Application-Recovery of mineral, vegetable oils and soluble.
The equipment has long reach hose vacuum pump sucks the liquid... |
|
|
 |
Dough Sheeter/Molds/extruder
MAIN PRODUCTS:
Spoiler Front Spoiler Side
-k12k * rear Spoiler * Vacuum Forming Machines (04)
extruder and Laminator (01)
suction Moulds (79)
cutting and finishing Molds (220)
spray booth (01)
Compressor (... |
Others suggested equipment for you:
|
|
 |
Brand: Jones
Press Jones and conveyor belts... |
|
|
 |
Semi automatic baler for SOAP (without mold).... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB
Sigma mixer, calender, extrusion and soap press.
Estimated production capacity: between 900 kg / h * up to 1,000 kg / h **.
Machines for the manufacture of soap composed of:
Sigma mixer for soaps.
Brand: G.Mazzoni.
Yield: 175 kg of bas... |
|
|
 |
Press with 14 holes for paçoca.... |
|
|
 |
Brand: Ares Seiki
Machining center.
Brand Name: Ares Seiki.
Model: A-600.
Fanuc Command.
Courses: 600 mm x 400 mm x 600 mm.
table size: 700 mm x 410 mm/8,000 RPM-BT 40.
Magazine Exchange quickly for 24 tools.
Advances: 36/36/36 m for minute... |
|
|
 |
Brand: Barban Vicentini
150 TON PRESS
REVERSE 180 TON PRESS
300 TON PRESS VICNETINI BARBAN OLD MODEL
... |
|
|
 |
Set the hot and cold rolling mill for aluminum
consists of 4 (four) modules rolling and in perfect working condition with year of manufacture 2008.
big Mill with 686 x cylinders measures 1,203 small mmLaminador with 600 cylinders measures x 1,170... |
|
|
 |
Machine for production of steel wool.... |
|
|
 |
Brand: Poreba
Torno.
Brand: Poreba.... |
|
|
 |
Brand: Mazak
Horizontal lathe.
Brand: Mazak.
Model: Mazak Quick Turn Smart 350.
Year: 2015.... |
|
|
 |
Press to manufacture peanut butter cups stopper, capacity 140 pieces/minute
... |
|
|
 |
Brand: Claumaq, Conserli, Lobopack
SOAP-making line composed by:
-stainless steel Mixer dust.
Brand Name: Conserli.
Model: MP 200.
Year: 2006.
Capacity: 200 kg.
Motor 1.5 HP.
1.50 m x 1.00 m x 1.60 time.
-
SOAP cutter Has 21 teeth, this in perfect operating condi... |
|
|
 |
Bambury Cope AML 25.
Engine: 100 HP.
opening pneumatic valve.
4 mixer wings.
Automated switchboard.
In great condition.
Year: 1980.... |
|
|
 |
Brand: Andritz
Press filter.
Brand: Andritz.
The whole set for sale for an unbelievable price, the set comprises:
- Frame (frame) 800/60.
- Drawing pressure 8 bar.
- Locking system 264MPA-E, single acting hydraulic cylinder with return
by spring and... |
|
|
 |
Around
CNC Machine 195II year 2004 model Nardini logic
tyre, * point with k12k *
electric Tower 8 positions
pneumatic Plate diam 8 k12k autoblok of * *
MCS Command
... |
|
|
 |
Brand: Astembor
Components: Atos
Presses for Vulcanizing
working pressure bar 120
500 x 500 mm Plateau
Go to gap between plateaus 110 mm
Operation on both sides with aperture of the array table
Programming manual from time and degaseification via CLP-Acts... |
|
|
 |
Brand: ROMI
CNC lathe
brand name: Romi Centur k12k * model: * 30 D
Command
year 9 Mach 2004.
With electric Tower 8 positions.... |
|
|
 |
Brand: Fabrima
Tablet blender.
Brand Name: Fabrima.
Model: M301-PP3402.
Year: 2004.... |
|
|
 |
Brand: Giustina Farell
Diameter: 2600 mm.
Step in the movement: 2032 mm.
permissible length between centers: 10000 m
maximum weight between centers: 200 tons.
Fagor 8055 CNC: S
year: 80.
Weight: Approximately 250 tons.... |
|
|
 |
Brand: Clearing
Press.
Brand Name: Clearing.
Type: Hydraulics.
Year: 1992.
Capacity: 580 Tons.
GPM .: According to approach speed.
Course .: 1600.
Regulation: 1200.
Hammer: 2240 x 960 mm (Sheet press 2740 x 1200 mm).
Table: 2740 x 1220 mm.... |
|
|
 |
Brand: Oxipira
- Plasma cutting machine.
- Brand: Oxipira.
- Equipment year: 2015.
- Machine purchased and never used.... |
|
|
 |
Brand: ROMI
Components: Siemens
Machine: Discovery 560
Manufacturer: ROMI
command: SIEMENS
main Motor: 9.3 KW
power: * k12k 20KVA * year of manufacture: 2005
tree Cone: ISO 40
RPM: 7500
course in "Z": 508
fast forward (X/Y/Z): 30 m/min
courses (X/Y/Z): 560 X 406 X... |
|
|
 |
Brand: Nardini
Lathe.
Brand: Nardini.
Model: MS-350.
Dimensions: 1.50 m of busbar.... |
|
|
 |
Rectify 18000 mm x 2000 mm
Measures-18000 mm x 2000 mm
height: 2000
02 Heads, a
Rotary hydraulic feeding with four engines
With wiring diagrams
... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Camargo Industrial acts exclusively as an advertising platform. All information, photos, descriptions, conditions, and equipment compliance are the sole responsibility of the advertisers, and it is up to the buyers to verify their accuracy before purchasing. Camargo Industrial does not guarantee the accuracy, completeness, legal and technical availability of the advertised equipment.
Workplace safety with machinery: The platform does not perform inspections or certifications. The suitability of equipment to standards is the responsibility of sellers and buyers.
|
 |
| |
|
