|
|
 |
Brand: ACG, Almapal, Pam
Components: Hindustan, Siemens
Vacuum ACG Pam for tablet press encapsulation.
Brand: ACG Pam.
Engine: 3.0 HP.
R.P.M: 3450.
Frequency: 60 Hz.
Components:
Hindustan Engine.
3TW42 Siemens Encapsulated Starter Magnetic Switch.... |
|
|
 |
NAW rotary press.
Ability to manufacture 200 paçocas per minute.... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Brand: GEA
Rotary tablet press with pre-compression and compression, forced feed, and cabinet.
Manufacturer: GEA.
Model: Courtoy.
More photos and information coming soon, please contact us.
Equipment was in production.
Includes two compression ki... |
|
|
 |
Brand: Alexanderwerk
Dry roller powder compactor for the pharmaceutical industry.
Manufacturer: Alexanderwerk.
More information coming soon, please contact us.... |
|
|
 |
Brand: Bomax
Filter press with polypropylene chamber plates.
Manufacturer/Brand: Bomax.
Model: 20/30.
Number of plates: 20.
Maximum number of plates allowed: 30.
Intended for solid-liquid separation (solids filtration) through the forced passage of... |
|
|
 |
Brand: Sorg
Guillotine press for cutting sheet metal.
Manufacturer: Sorg.
Model: SGH 47 / 30.... |
|
|
 |
Semi-automatic paçoca cork press.
Approximate production: up to 200 units per minute.
With two ways and output channels for feeding the packaging machine.
Hole diameter: 30 mm.
Height: adjustable.
1.5 HP engine and 1700 rpm.
Voltag... |
|
|
 |
Hydraulic press.
Manufacturer: Hidrodynamic Machines.
Type: HD 40.
Year: 1997.
Stroke: 400 mm.
Strength: 40 tons.
Maximum Pressure: 180kg / cm2.
Engine: 30 hp.... |
|
|
 |
Wafer sheet forming and assembly machine and wafer sheet press.
Cylinder press to adjust the height and thickness of the wafer sheets.
First, the block is formed with wafer sheets, and then the block is pressed by the cylinder to adjust the hei... |
|
|
 |
Table with two tubs of approximately 100 liters.
With sliding piston system to extract juices.... |
|
|
 |
Stamping set for hard candies.
Model: IMD.... |
|
|
 |
Brand: Tung Yu
Double press for vulcanizing technical rubber parts.
Manufacturer | Brand: TUNG YU.
Model: TYC/V/182/S/PCD.
Capacity: 350 tons.
Approximate production capacity: up to 6 parts with a diameter of 200 mm per cycle of 2.4 minutes.
For vulc... |
|
|
 |
Brand: Pan Stone
Hydraulic vacuum press for rubber vulcanization.
Manufacturer | Brand: Pan Stone.
Model: P-V-250-3RT-X-2PCD.
Approximate capacity: 250 tons.
With vacuum chamber and electric heating.
With three sliding plates (platforms) - 3RT.
Year... |
|
|
 |
Brand: Tung Yu
Double press for vulcanizing technical rubber parts.
Manufacturer | Brand: TUNG YU.
Model: TYC-V-16-3RT-2-SPCD.
Capacity: 250 tons.
Approximate production capacity: up to 60 pieces of 70 x 70 mm per 3-minute cycle.
For vulcanizing tech... |
|
|
 |
Brand: Pan Stone
Double press for vulcanizing technical rubber parts.
Manufacturer | Brand: Pan Stone.
Model: P-V-350-2RT-2PCD.
Approximate capacity: 350 tons.
Approximate productivity: up to 60 parts with a diameter of 60 mm in a 3-minute cycle.
Year:... |
|
|
 |
Brand: Pan Stone
Double press for vulcanizing technical rubber parts.
Manufacturer | Brand: Pan Stone.
Model: P/V/200/2RT/2/PCD.
Approximate capacity: 200 tons.
The equipment has a production capacity of 20 pieces of 80 x 80 mm in a 3-minute cycle.
Yea... |
|
|
 |
Brand: Erli
Filter press for liquids | Gear transfer pump.
Manufacturer | Brand: Erli.
For liquid products.
Gear pump with paper filter.
One gear in stainless steel and one in polypropylene.
Cart with rubber casters.
Hose fittings on the termin... |
|
|
 |
Brand: Stokes
Rotary tablet press for tablet manufacturing.
Manufacturer | Brand: STOKES.
Model: 900-612-1.
Number of punches: 16 punches.
Approximate capacity of 16 tablets per second, 57,600 tablets per hour.
For manufacturing various tablets by c... |
|
|
 |
Hydraulic press for rubber vulcanization, 500 x 500 mm.
With a 400 mm piston.... |
|
|
 |
Brand: Star Systems
Stainless steel filter press with 45 plates.
Manufacturer: Star Systems.
Model: 50-18A/SS/RO.... |
|
|
 |
Brand: LANZHOU LIMAC
Vertical soap stamping press.
Manufacturer | Brand: LANZHOU LIMAC INDUSTRIAL MACHINNERY CO. LTDA.
Model: 2000ES-MFS-6 Vertical Stamper with Freezing Dies.
Year of manufacture: 2011.
For pressing and molding soaps.
Approximate speed:
... |
|
|
 |
Brand: Neuberger
Components: Siemens, WEG
Rotary tablet press for compressing tablets and pills.
For 13 mm round tablets and 19 mm x 9 mm oblong tablets.
Manufacturer | Brand: Neuberger.
Model: MN-20F - 20 punches.
Approximate capacity: 400 to 900 tablets per minute.
Machine p... |
|
|
 |
Brand: Miller
Offset printing press.
Manufacturer | Brand: Miller.
Model: TP104/6.
Format: 74 x 104 cm, 6 colors with 2 reversals (6x0 - 4x2 - 5x1).
With non-stop infrared powder drying.
High stack, input and output, 6 Bawduin refrigerators, adjustm... |
|
|
 |
Brand: MONKEY
Rubber vulcanization press 700 x 500 mm.
Manufacturer | Brand: MONKEY.
Plate dimensions: 700 mm x 500 mm.
250 mm piston.
Has 3 slots.
Year: 1990.
For manufacturing rubber parts through vulcanization.
With 5 HP WEG motor.
Volta... |
|
|
 |
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB
Sigma mixer, calender, extrusion and soap press.
Estimated production capacity: between 900 kg / h * up to 1,000 kg / h **.
Machines for the manufacture of soap composed of:
Sigma mixer for soaps.
Brand: G.Mazzoni.
Yield: 175 kg of bas... |
|
|
 |
Brand: Jones
Press Jones and conveyor belts... |
|
|
 |
Semi automatic baler for SOAP (without mold).... |
|
|
 |
Swing oil packaging, unused 2010 ... |
|
|
 |
Brand: Mazak
Horizontal lathe.
Brand: Mazak.
Model: Mazak Quick Turn Smart 350.
Year: 2015.... |
|
|
 |
Brand: Nardini
Lathe.
Brand: Nardini.
Model: MS-350.
Dimensions: 1.50 m of busbar.... |
|
|
 |
Brand: Astembor
Components: Atos
Presses for Vulcanizing
working pressure bar 120
500 x 500 mm Plateau
Go to gap between plateaus 110 mm
Operation on both sides with aperture of the array table
Programming manual from time and degaseification via CLP-Acts... |
|
|
 |
Brand: Heller
Machining center brand/manufacturer Heller.
Available for sale 5 units.
Model: MCP H 250
Machine underwent maintenance.
-equipment Data
-Desktop:
-longitudinal x-axis Stroke (mm)-800
-longitudinal Stroke y-axis (mm)-800 ... |
|
|
 |
Brand: Poreba
Lathe.
Brand: Poreba.
Model: TCG 200 Mach.... |
|
|
 |
Brand: Heidelberg
Hydraulic Press Heidel... |
|
|
 |
2 thermal hydraulic presses for rubber
3 500 x 500 3 Dishes go 2 1/2 column 250 mm piston resistance heating
3 500 x 400 3 Dishes go 2 column "150 mm piston oil heating
500 mm Working Area (both)... |
|
|
 |
Brand: Claumaq, Conserli, Lobopack
SOAP-making line composed by:
-stainless steel Mixer dust.
Brand Name: Conserli.
Model: MP 200.
Year: 2006.
Capacity: 200 kg.
Motor 1.5 HP.
1.50 m x 1.00 m x 1.60 time.
-
SOAP cutter Has 21 teeth, this in perfect operating condi... |
|
|
 |
Brand: Tonanni
Planer table.
Brand Name: Tonanni.
Table 4.10 m x 1.40 m.
6 m long rail.
Height 1.80 m.... |
|
|
 |
Brand: GOITI
PGA-4 model punch mark GOITI... |
|
|
 |
Brand: Vitoria
-Milling machine Brand Vitoria, with cambio, Motor and 2 heads (horizontal and vertical Machining) Splitter and dividers, and some records of milling cutter and endmill.
presses Rocker type with screw will free from 650 mm
-Type Body with fiber p... |
|
|
 |
Brand: ROMI
CNC lathe Romi Centur 30 D Multiplic.
Year: 2007.
Control: Fanuc.
Electric Tower 8 positions.
Among tips: 1,000 mm.
Against pneumatic point.... |
|
|
 |
Brand: Barban Vicentini
150 TON PRESS
REVERSE 180 TON PRESS
300 TON PRESS VICNETINI BARBAN OLD MODEL
... |
|
|
 |
Brand: Oxipira
- Plasma cutting machine.
- Brand: Oxipira.
- Equipment year: 2015.
- Machine purchased and never used.... |
|
|
 |
Brand: ROMI
CNC lathe
brand name: Romi Centur k12k * model: * 30 D
Command
year 9 Mach 2004.
With electric Tower 8 positions.... |
|
|
 |
Bambury Cope AML 25.
Engine: 100 HP.
opening pneumatic valve.
4 mixer wings.
Automated switchboard.
In great condition.
Year: 1980.... |
|
|
 |
Around
CNC Machine 195II year 2004 model Nardini logic
tyre, * point with k12k *
electric Tower 8 positions
pneumatic Plate diam 8 k12k autoblok of * *
MCS Command
... |
|
|
 |
01-03 ton press (green)
-01 03 ton press (green) c/bookmark
-preensa 01 of 04 ton (Brown)
-01 08 ton press (green)
-01 08 ton press (green)
-01 nylon roller machine p/cutting torch parts
-01 p/calender tracking parts and or materials
to... |
|
|
 |
Brand: French Oil Mill Machinery, Imapre
02 large Presses with capacity of 750 tonnes (brand name: THE FRENCH OIL MILL MACHINERY co.)
04 small Presses with a capacity of 350 tonnes. (tag: IMAPRE)
fully automated Greenhouse
02
Retificas for wheel... |
|
|
 |
Tacho inox.
Capacity: 2000 l.
Tacho inox.
Capacity: 660 l.
Tacho inox.
Capacity: 200 l.... |
|
|
 |
Brand: Maho
MARK MAHO MH MODEL 600E with CNC432 COMMAND and COLOR VIDEO GRAPHIC CONNECTION 24V for 22 tools, NP 48588, IS0 40. ... |
