Used machines for sale
Automatic sheet metal unwinder
>> Metal
|
|
|
|
Automatic sheet metal unwinder |
Automatic sheet metal unwinder.
Single unwinder for non-motorized tapes.
Model SDB-1200M .
Material to be processed: 430 stainless steel.
Resistance limit: less than or equal to 400 N/mm².
Maximum tape width: 600 mm.
Roll inner diameter: 380~520mm.
Maximum external diameter of the roll: 1,200 mm.
Maximum load capacity: 1,200 kg.
Built in welded and normalized steel sheets.
Axis in high resistance steel, working on bearings sized to support high loads.
Self-centering mandrel expansion systems.
Structural cabinet in welded and normalized steel.
Lateral supports to support and guide the tape.
Adjustable inertia brake.
2. Conveyor Car / Coil Elevator model SCTB-1.200:
Maximum coil width: 600 mm.
Coil outside diameter: 800~1200mm.
Coil cradle with support rollers.
Drive through hydraulic system.
Vertical lifting stroke: 300 mm.
Horizontal travel stroke: 600 mm.
Maximum load capacity: 1,200 kgf.
Robust structure, in welded steel, with four wheels on roller bearings.
Portable pushbutton for equipment operation.
Hydraulic unit integrated into the uncoiler.
3. SEF-6087 motorized tape straightener:
Material to be processed: 430 stainless steel.
. Resistance limit: less than or equal to 400 N/mm².
. Maximum tape width: 600 mm; . Maximum tape thickness: 0.4 ~ 1.5 mm (Stainless steel).
. Built on a solid base of welded plates.
. The rollers are made of steel, heat treated, rectified and chromed.
. All lower rollers are linked by gears.
. Four (04) pulling rollers for pulling the material.
. Number of straightening rollers: 07 (seven).
. Individual position adjustment for upper straightening rollers.
. Tape guide at the entrance and roller basket at the tape exit.
. Electronic sensor for loop control ("looping").
. Drive by AC geared motor.
. Control by frequency inverter.
. Potentiometer for working speed adjustment.
. Variable operating speed: 0~60m/min.
. Supply voltage: 380 Vac / 60 Hz. 4
. Programmable electronic feeder model AES-600/2.
. Material to be processed: 430 stainless steel.
. Material resistance: less than or equal to 400 /mm².
. Maximum tape width: 600 mm.
. Maximum tape thickness: 2.0 mm.
. Programmable feeds between 0.01 ~ 9999.99 mm in 0.01 mm increments.
. Feed accuracy: ± 0.05 mm non-accumulative.
. High torque brushless servomotor drive.
. Operation panel with LCD display and softtouch keys mounted on its own console.
. Digital microprocessor controller with integrated positioning system.
. Programmable acceleration and deceleration ramps via HMI.
. Database for storing up to (120) production recipes.
. “JOG” operating mode (manual forward / reverse) for machine and tool adjustment.
. Pneumatic system for opening the feed rollers for “pilotting” the tape.
. Pneumatic adjustment of feed roller pressure.
. Roller basket at the feeder inlet.
. Compact design, easy to operate and install.
. Portable keypad with “JOG” functions (advance / return in manual mode).
. Supply voltage: 380 Vac / 60 Hz. 5.
Hydraulic guillotine model SGH-600/2.0.
. Material to be processed: 430 stainless steel.
. Resistance limit: less than or equal to 400 N/mm².
. Maximum cutting width: 600 mm.
. Maximum material thickness: 2.0 mm.
. Operating frequency (no load): up to 20 cycles/min.
. Guillotine with movable upper head.
. Special knives in tempered and ground tool steel.
. Knives mounted at an angle to reduce cutting effort and noise.
. Plate presses with spring-loaded feet.
. Screws for adjusting the gap between the knives depending on the working thickness.
. Metal structure in welded steel.
. Adjustable side guides to guarantee the squareness of the piece (“blank”) to be cut.
6. Station for stacking sheets and forming bales:
. Maximum width of sheets to be cut: 600 mm.
. Length of sheets to be cut: 300 ~ 2000 mm.
. Maximum bale weight: 3,000 kg.
. Platform height: approx. 140 mm.
. Maximum stacking height (including “pallet”): 500 mm.
- Guiding sheets for stacking, pneumatically articulated:
. Structure built in welded steel, supported on the factory floor.
. Lateral guides to support the plates during feeder advancement.
. Articulation of the guides by pneumatic cylinders to release the cut sheets.
. Manual adjustment of the position of the side guides by handle.
. Pneumatic beaters for bale alignment (positioning of cut sheets).
- Stacker for bale formation:
. Hydraulic pantographic platform for lifting the stacking table.
. Vertical lifting stroke (approx.): 500 mm. |
|
|
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing. Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally. The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment. Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial.
Others suggested equipment for you:
|
|
|
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio). -capacity 160 units/minute. -press Control Board. -Motor and reducer. -Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
|
Brand: Jones
Press Jones and conveyor belts... |
|
|
|
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB
Sigma mixer, calender, extrusion and soap press.
Estimated production capacity: between 900 kg / h * up to 1,000 kg / h **.
Machines for the manufacture of soap composed of:
Sigma mixer for soaps.
Brand: G.Mazzoni.
Yield: 175 kg of bas... |
|
|
|
Semi automatic baler for SOAP (without mold).... |
|
|
|
Brand: Maho
MARK MAHO MH MODEL 600E with CNC432 COMMAND and COLOR VIDEO GRAPHIC CONNECTION 24V for 22 tools, NP 48588, IS0 40. ... |
|
|
|
Brand: Poreba
Torno.
Brand: Poreba.... |
|
|
|
Brand: Nomura
Mechanical guillotine mark Nomura, cutting capacity-mild steel 55 mm, length 1200 mm cutting useful motor power 55 kw, knife length 1830 mm, weight 45 tonnes... |
|
|
|
Brand: Mazak
Horizontal lathe.
Brand: Mazak.
Model: Mazak Quick Turn Smart 350.
Year: 2015.... |
|
|
|
2 thermal hydraulic presses for rubber 3 500 x 500 3 Dishes go 2 1/2 column 250 mm piston resistance heating 3 500 x 400 3 Dishes go 2 column "150 mm piston oil heating 500 mm Working Area (both)... |
|
|
|
Tacho inox. Capacity: 2000 l.
Tacho inox. Capacity: 660 l.
Tacho inox. Capacity: 200 l.... |
|
|
|
Brand: Oxipira
- Plasma cutting machine.
- Brand: Oxipira.
- Equipment year: 2015.
- Machine purchased and never used.... |
|
|
|
Brand: Ares Seiki
Machining center.
Brand Name: Ares Seiki.
Model: A-600.
Fanuc Command.
Courses: 600 mm x 400 mm x 600 mm.
table size: 700 mm x 410 mm/8,000 RPM-BT 40.
Magazine Exchange quickly for 24 tools.
Advances: 36/36/36 m for minute... |
|
|
|
Press with 14 holes for paçoca.... |
|
|
|
Brand: Barban Vicentini
150 TON PRESS REVERSE 180 TON PRESS 300 TON PRESS VICNETINI BARBAN OLD MODEL ... |
|
|
|
Brand: ROMI
Components: Siemens
Machine: Discovery 560 Manufacturer: ROMI command: SIEMENS main Motor: 9.3 KW power: * k12k 20KVA * year of manufacture: 2005 tree Cone: ISO 40 RPM: 7500 course in "Z": 508 fast forward (X/Y/Z): 30 m/min courses (X/Y/Z): 560 X 406 X... |
|
|
|
Brand: TRUMPF
PRESSES TRUMPF TRUMATIC 202, Type Nr393 69120/H1 with the following features: ability to: 20 tonnes; Punctured working area: Y1600 X 2000 mm (max. working area without reclamping or repositioning of piece) 2000 x 1600 (80 x 63 in) Retrofit Cont... |
|
|
|
Brand: OKUMA
CNC lathe.
Mark Okuma.
Model LB 15.
Year 1990.
Missing controller.... |
|
|
|
Brand: GOITI
PGA-4 model punch mark GOITI... |
|
|
|
Brand: Andritz
Press filter.
Brand: Andritz.
The whole set for sale for an unbelievable price, the set comprises:
- Frame (frame) 800/60.
- Drawing pressure 8 bar.
- Locking system 264MPA-E, single acting hydraulic cylinder with return by spring and... |
|
|
|
Brand: Nardini
Lathe.
Brand: Nardini.
Model: NDT-650 Nodus.
Dimensions: 2.90 m of bus.... |
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing. Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally. The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment. Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial. |
|
|
|