|
|
 |
Brand: Alfa Laval
Skid-mounted centrifugal separator for cleaning oils from hydraulic and other similar systems.
Manufacturer: Alfa Laval.
Maximum capacity: 10.6 m³/h, depending on the product.
Model: MAB 206.
The equipment was recently overhauled and skid... |
|
|
 |
Brand: Westfalia
Centrifugal separator for purifying industrial oils in general.
Manufacturer | brand: Westfalia.
Model: OTA 14.
Approximate capacity: 7,300 liters per hour.... |
|
|
 |
Brand: Westfalia
Centrifugal separator for purifying oils in general.
Manufacturer | brand: Westfalia.
Model: OTB 2.
Approximate capacity: 1,000 liters per hour.
Two units.... |
|
|
 |
Brand: Westfalia
Centrifugal separator for purifying oils in general.
Manufacturer | brand: Westfalia.
Model: OTA 20.
Approximate capacity: 11,000 liters per hour.... |
|
|
 |
Brand: Alfa Laval
Centrifugal separator for industrial oils.
Manufacturer | brand: Alfa Laval.
Model: MOPX 205.
Approximate capacity: 4,900 liters per hour.
For separating fine solids and other impurities.
With panel.... |
|
|
 |
Brand: Alfa Laval
Automatic centrifugal separator.
Manufacturer: Alfa Laval.
Model: MAPX-207.
With heater, vacuum pump, mug filter, 220 / 380 / 440 V transformer, control panel and waste tank.
For treatment of mineral oils in purification, clarification, d... |
|
|
 |
Brand: Revisa Centri
Stainless steel centrifugal skimmer.
Manufacturer/Brand: Revisa Centri.
Model: ECO 5+.
Approximate skimming capacity: up to 5,000 liters per hour.
Approximate standardization capacity: up to 7,500 liters per hour.
Year: 2025.
Unused... |
|
|
 |
Brand: Alfa Laval, Tetra Pak
Self-cleaning hermetic centrifugal separator for skimming and standardizing heated milk.
Manufacturer | Brand: Alfa Laval (Tetra Pak)
Model: H-MRPX 714-HGV35-60.
Approximate capacity: up to 15,000 liters per hour for milk skimming.
Approx... |
|
|
 |
Brand: Westfalia, Westfalia GEA
Centrifugal separator/skimming machine for skimming and standardizing milk and its derivatives.
Manufacturer | Brand: Westfalia | GEA Group.
Model: MM 5004.
Approximate skimming capacity: up to 5000 liters per hour.
Standardization up to ... |
|
|
 |
Brand: Mausa
Industrial continuous centrifugal separator.
Manufacturer/Brand: Mausa.
Model: SCM 95C.
Approximate capacity: up to 90,000 liters per hour.
Year: 2005.
Equipment currently undergoing refurbishment.
Features a cast iron (FoFo) housin... |
|
|
 |
Brand: HEINKEL
Continuous solid-liquid separator centrifuge.
Manufacturer: HEINKEL Process Technology GmbH (Besigheim-Ottmarsheim, Germany)
Exact Model/Type: V630 BK III.
Year of Manufacture: 2010.
Maximum Drum Speed: 3000 rpm (1/min).
Maximum Centri... |
|
|
 |
Brand: Ksb, NASH, Sabroe, Schulz
Compressor Set
- Machine Room - Compressors:
Composed of:
1 Hidronics HY630 exhaust system.
1 Sabroe 100 HP SMC compressor.
1 Johnson Ohur oil separator.
2 Sabroe 25 HP SMC compressors.
1 Schulz SRS 450 air dryer.
1 Schulz SRP... |
|
|
 |
Brand: Ksb
Components: WEG
Carbon steel pump with a 15 HP motor.
Manufacturer | Brand: KSB.
Inlet: 2.1/2 inches x Outlet: 1.1/2 inches.
Voltage: 220 / 380 / 440 volts.
Serviced with seal replacement in 07/26.
With WEG W22 Plus motor.
Water pump coupled to an ... |
|
|
 |
Brand: Castinox
Components: WEG
Sanitary centrifugal pump.
Manufacturer | Brand: Castinox.
Pump Model: BC-600 S
It is missing the impeller.
Year of manufacture: 2002.
Technical data of the electric motor:
Manufacturer: WEG.
Voltage: 220 / 380 V Three-phase.
... |
|
|
 |
Stainless steel jacketed tank.
With heat exchanger and centrifugal pump.... |
|
|
 |
Closed spiral centrifugal pump.
Volute model EQ 150-43.
Material: CF8 stainless steel.... |
|
|
 |
Spare part rotor model EQ 90 - 48.
CF8 stainless steel material.
For irrigation of crops, plantations and agribusiness.... |
|
|
 |
New replacement part for rotor TCI 150 - 320.
Material: CF8 stainless steel.... |
|
|
 |
Impeller for MGN centrifugal pump.
Replacement part MGN 250 - 200 - 500 rotor.
Material: CF8 stainless steel.... |
|
|
 |
Spare part for centrifugal pump.
Model: ITT Goulds 10 x 8 x 15.
Material: CF8 stainless steel.... |
|
|
 |
Pressure cap for industrial centrifugal pump.
New replacement part.
Model: ETA 250 - 40.
Material: CF8 stainless steel.... |
|
|
 |
Pressure cap for industrial centrifugal pump.
New replacement part.
Model: ETA 150-50.
Material: CF8 stainless steel.... |
|
|
 |
Pressure cap for industrial centrifugal pump.
New replacement part.
Model: ETA 150 - 33.
Material: CF8 stainless steel.... |
|
|
 |
Pressure cap for industrial centrifugal pump.
New replacement part.
Model: ETA 126-26.
Material: CF8 stainless steel.... |
|
|
 |
Brand: Bombinox
Centrifugal pump with lung tank.
Brand: Bombinox.
Model: BL 60.... |
