|
|
 |
Components: ABB, Siemens
Industrial line for production of soft capsules (Softgel) used in pharmaceutical, nutraceutical, cosmetic, veterinary and food industries.
Equipment designed for encapsulation of liquids, vitamins, dietary supplements, nutraceutical oils, natural ... |
|
|
 |
Brand: Milainox
Non-carbonated beverage filling line.
Composed by:
Plate pasteurizer.
Capacity: 1000 l / h.
With skid, panel, frequency inverter.
Isothermal process tank with mixer, double spray ball.
Capacity: 1,000 L.
1000 liter capacity isoth... |
|
|
 |
Fancoil or self with humidity control
Mark: trox/trane/hitachi/johnson controls
year: 2000
model: 99000 kcal fridge/colorífico
89000 what the machine produces: control of temperature and humidity of air conditioned Chambers
Equal or similar... |
|
|
 |
Waste oil burner
Wob04/wb Model 04-a
oil consumption 2-4 kg/h
output power 17-50kw
20.000-50.000 heat output kcal/h
W
90 Engine Nozzle 1 * 1/2 "
89 mm tube diameter
power supply 220 V, 50 Hz
net weight 20 kg
... |
|
|
 |
Machine for candy to put in the bag
Mixer with two axles
complete line of Dairy
Tube
Packinghouse to 15 Kg
3-wire machine mechanical Stretcher screens with a maximum capacity of 40 cm, 4 x 4 Carousel machine
machine to make baby socks, ... |
|
|
 |
Chocolate, coating, paste, and other refining equipment.
Capacity: 300 kg / cycle.
Composed of:
- Carbon steel homogenization ladle.
Approximate capacity: 3000 liters.
- Ball mill.
- Jacketed stainless steel melting tank.
Approxi... |
|
|
 |
Brand: Alfa Laval
System for heating thermal fluid.
Brand: Alfa Laval, Aalborg.
Model: 25 - HO- 25M.
Year: 2009.
Thermal capacity: 2,500 Kcal / Hour.
Volumetric capacity: 2175 liters.
P.M.T.A: 150 Psig.
Hydrostatic Test: 225 Psig.
Category: 3.
... |
|
|
 |
Brand: Alfa, Amandus Kahl, Tigre
Bran pelleting line with mill and drying oven.
Pellet mill for bran pelleting.
Manufacturer: Kahl Amandus Kahl.
Model: 33-390.
With new spare parts.
Stainless steel hammer mill.
Manufacturer: Tigre.
Model: ASN 6.
With 6hp moto... |
|
|
 |
Brand: Refriac
Industrial chilled water bank chiller.
Manufacturer | Brand: Refriac.
Model: Rai - 150.
Heating capacity: 45,000 kcal/h (15 TR.)
Input power: 23 kW.
Weight: 800 kg.
Year of manufacture: 2003.... |
|
|
 |
Brand: MECALOR
Chilled water unit | industrial refrigerator | chiller.
Manufacturer | brand: Mecalor.
Model: MSA-15-RI-380/C.
Approximate nominal capacity: up to 15,000 kcal/h.
Year: 2014.
It was used to cool water in the sparkling water production p... |
|
|
 |
Brand: MetaControl
Chiller cooling bank of chilled water.
Manufacturer | brand: Metacontrol.
Capacity: up to 60 kcal - 380 V.
Year: 2017.
Operated for 8 years.
For water cooling.... |
|
|
 |
Brand: Frigomat
Water-based ice cream pasteurizer.
Manufacturer/Brand: Frigomat.
Model PEB 25.
Equipment with an approximate capacity of 30 kg/cycle.
With automatic antifreeze function and a maximum water bath temperature of 90°C.
With stainless steel... |
|
|
 |
Brand: Aalborg, Alfa Laval
Heater for industrial heating thermal fluid.
Brand: Alfa Laval Aalborg.
Model: 50 - HO - 50 M.
Process: Thermal fluid heater for propane refining.
Thermal capacity: - 5,000,000 KCAL/H
Volumetric capacity: 2960 Liters.
P.M.T.A - 300 ... |
|
|
 |
Boiler with chimney and condensed tank.
Brand: TERMUS.
Model: TCC 15/3 CMG.
Fuel: LPG gas.
Capacity: 300,000 Kcal/H.
Flow: 470 kcal/H.
Year of Manufacture: 1988.... |
|
|
 |
Brand: Konus
Wood or wood chip boiler.
Thermal fluid heater.
Manufacturer | Brand: Konus.
Year: 2010.
Approximate capacity: 3,150,000 kcal.
Fuel: wood (manually) or wood chips (continuous feed via screw system included with the equipment, with a ba... |
|
|
 |
Brand: Innova Inox
Ice bank for cooling water during the pasteurization process.
Manufacturer | Brand: Innova Inox.
Model: TQG-4000L.
Approximate capacity: up to 4,000 liters.
Year of manufacture: 2019.
Machine never used.
Overhauled in September 2025... |
|
|
 |
Brand: Polo Sul Máquinas
Mini pasteurization plant in AISI 304 stainless steel.
For the pasteurization and maturation of cocoa and soy products using an aseptic process.
Can be used for ice cream, açaí, and other pasteurized products.
1. Mini pasteurization plant in... |
|
|
 |
Tunnel kiln with light wagons for firing ceramic linings or calcining materials.
Year: 2013. Operating time: 12 years.
For continuous firing of lining bricks.
Approximate capacity: 18,600 pieces per day.
Pieces measuring 248 mm x 62 mm x ... |
|
|
 |
Brand: ETNA
Components: Dungs
ndustrial boiler.
Brand: Etna.
Model: GMR - 300.
Year: 2005.
M.W.A.: 4.0 kgf / cm. (³)
P. Test: 4.0 kgf / cm (³)
Fuel: LPG.
Thermal power: 300,000 Kcal / h.
Consumption: 30.0 kg / h.
Components:
Dungs.... |
|
|
 |
Brand: FIMAK, Gás Service Industrial, Líder Indústria Mecânica
Pizza, bread and bakery dough production line.
Approximate productivity of up to 2,000 units per hour.*
*For discs between 150 mm and 250 mm.
Approximate productivity of up to 600 units per hour.*
*For discs between 250 mm and 500 mm.
Line... |
|
|
 |
Brand: Brasforno, Cozil, Haas, Icaterm, Klainox, Tecnomecal
Components: Bitzer, Brahma, Danfoss, Dungs, Hofomat, Siemens
Line for making empanadas.
Brand Name: Tecnomecal.
Composed by:
Forming of empanadas.
Brand Name: Tecnomecal.
Model: ML-300.
Lamination of two seasons.
Brand Name: Tecnomecal.
Model: 600.
Two cylinders of imported mass Argenti... |
|
|
 |
Brand: Hebleimar
Line for chocolate coating.
-200 ML model line consists of the following facilities:
-continuous Temperadeira TPR model 30 with a capacity of 30 kg/h of chocolate.
technical characteristics:
direct Cooling cylinder R134A.
initial Heating ... |
|
|
 |
Brand: Braibanti
Espagueteira Braibanti 500 kl, set Bloodsucker farina, packinghouse Mont Past.
the equipment is in operation.... |
|
|
 |
Brand: SIAT
Box sealer.
Brand: Siat.
Model: SM8.
Year: 1996.
Voltage: 220 V-6.0 Hz-180 Kw.... |
|
|
 |
Brand: Krones
Components: Siemens
Brand: Krones.
Year: 1995.
Model: # Palmaster type k. 456-260.
Productivity: 20 minute boxes.
Condition: Good, healthy.
Technical information about equipment: voltage 238v, SIEMEMS PLC SIMATIC S5, technical assistance and spare parts with m... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Brand: Jones
Press Jones and conveyor belts... |
|
|
 |
Semi automatic baler for SOAP (without mold).... |
|
|
 |
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB
Sigma mixer, calender, extrusion and soap press.
Estimated production capacity: between 900 kg / h * up to 1,000 kg / h **.
Machines for the manufacture of soap composed of:
Sigma mixer for soaps.
Brand: G.Mazzoni.
Yield: 175 kg of bas... |
|
|
 |
Brand: Vitoria
-Milling machine Brand Vitoria, with cambio, Motor and 2 heads (horizontal and vertical Machining) Splitter and dividers, and some records of milling cutter and endmill.
presses Rocker type with screw will free from 650 mm
-Type Body with fiber p... |
|
|
 |
Brand: Fabrima
Tablet blender.
Brand Name: Fabrima.
Model: M301-PP3402.
Year: 2004.... |
|
|
 |
Around
CNC Machine 195II year 2004 model Nardini logic
tyre, * point with k12k *
electric Tower 8 positions
pneumatic Plate diam 8 k12k autoblok of * *
MCS Command
... |
|
|
 |
Brand: Poreba
Lathe.
Brand: Poreba.
Model: TCG 200 Mach.... |
|
|
 |
2 thermal hydraulic presses for rubber
3 500 x 500 3 Dishes go 2 1/2 column 250 mm piston resistance heating
3 500 x 400 3 Dishes go 2 column "150 mm piston oil heating
500 mm Working Area (both)... |
|
|
 |
Brand: VMA
Plaina limadora.
Brand: VMA.... |
|
|
 |
Brand: Oxipira
- Plasma cutting machine.
- Brand: Oxipira.
- Equipment year: 2015.
- Machine purchased and never used.... |
|
|
 |
Installers of air conditioning/production of ducts.
Production: bending and performs the functions with plates up to 1.5 mm.
year: 2014.
Model: Triplex (TDC flange, hip and clip).
In great condition used only 30 days of use for calibration.
... |
|
|
 |
|
|
|
 |
Machine for production of steel wool.... |
|
|
 |
Brand: ROMI
Components: Siemens
Machine: CENTUR 50 d
Manufacturer: ROMI
command: SIEMENS
main Motor: 33.6 KW
power: 50 KVA
year of manufacture: 2009
Home tree axis (mm): 135
RPM (2 tracks): 1 ~ 258/1 ~ 1048
Diameter on the bus: 700
course in (X/Z): 520/3020
fast... |
|
|
 |
Brand: Mazak
Horizontal lathe.
Brand: Mazak.
Model: Mazak Quick Turn Smart 350.
Year: 2015.... |
|
|
 |
01-03 ton press (green)
-01 03 ton press (green) c/bookmark
-preensa 01 of 04 ton (Brown)
-01 08 ton press (green)
-01 08 ton press (green)
-01 nylon roller machine p/cutting torch parts
-01 p/calender tracking parts and or materials
to... |
|
|
 |
Brand: ROMI
CNC lathe Galaxy 10 Romi.
Year: 2002.
Fanuc 21I command.
Chip carrier.
Pistol washing.
12 Tower positions supported by tools.
Machine working 100%.... |
|
|
 |
Set the hot and cold rolling mill for aluminum
consists of 4 (four) modules rolling and in perfect working condition with year of manufacture 2008.
big Mill with 686 x cylinders measures 1,203 small mmLaminador with 600 cylinders measures x 1,170... |
|
|
 |
Brand: Nardini
Lathe.
Brand: Nardini.
Model: NDT-650 Nodus.
Dimensions: 2.90 m of bus.... |
|
|
 |
Brand: Barban Vicentini
150 TON PRESS
REVERSE 180 TON PRESS
300 TON PRESS VICNETINI BARBAN OLD MODEL
... |
|
|
 |
Brand: Giustina Farell
Diameter: 2600 mm.
Step in the movement: 2032 mm.
permissible length between centers: 10000 m
maximum weight between centers: 200 tons.
Fagor 8055 CNC: S
year: 80.
Weight: Approximately 250 tons.... |
|
|
 |
Brand: ROMI
Components: Siemens
Machine: Discovery 560
Manufacturer: ROMI
command: SIEMENS
main Motor: 9.3 KW
power: * k12k 20KVA * year of manufacture: 2005
tree Cone: ISO 40
RPM: 7500
course in "Z": 508
fast forward (X/Y/Z): 30 m/min
courses (X/Y/Z): 560 X 406 X... |
|
|
 |
Brand: Stankoimport
About Paral·lel the 3 guide stankoimport (kramatorsk) 1a665
year: 1984
height: 850 mm point
distance between centers: 16000 mm
max on bench: 1600 mm
max in motion: 1250 mm
pallet width: 1850 mm
flow between the tips: 40 ton
spindle mo... |
|
|
 |
Brand: ROMI
CNC lathe Romi Centur 30 D Multiplic.
Year: 2007.
Control: Fanuc.
Electric Tower 8 positions.
Among tips: 1,000 mm.
Against pneumatic point.... |
