|
|
|
| Plastic injection mold set |
|
Plastic injection mold set.
For ABS, polystyrene or polypropylene.
For: paper towel dispensers, toilet roll and intercalated toilet, soap dish and paper towel coil towel rack.
Average cycle of 45 seconds. |
|
|
|
|
|
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing.
Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally.
The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment.
Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial.
Others suggested equipment for you:
|
|
 |
Brand: Polienva Movitron
- Pneumatic dosing machine.
- Stainless steel.
- Brand: Polienva Movitron.... |
|
|
 |
Brand: Loma Systems
Metal detector with treadmill.
- Brand Name: Loma Systems.
- Model: IQ 2.
- Complete equipment.... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Brand: Baker Perkins
Cobrideira for chocolate.
Brand: Baker Perkins.
Composed by:
-Transfer pump.
-Heating System.
-Chocolate curtain.
-Ventilation to remove excess.
-Input and output table 400 mm.
Measures: 1.20 x width x length 1.65 1.70... |
|
|
 |
Automatic weighing machine
- Voltage: 220 V three-phase.
- Components: 01 engine generating 0.75 KW of power.
- Dimensions, 1490 mm long by 740 mm wide.
... |
|
|
 |
Brand: Narita
- BOPP labeling machine, fed balel / roll roll, for pet bottles and smaller bottles.
- Brand: Natira.
- Model: MZ 200.
- Year: 2007.
- For BOPP labels.
- Capacity for 150 bottles / minutes for current format.
- Maximum capacity: 200... |
|
|
 |
Brand: Riva
Compressor rotary press tablets.
Brand Name: Riva.
Model: D-14.
Equipment imported from Argentina.
Machine in excellent condition.... |
|
|
 |
Brand: Delbras
- No Break.
- Brand: Delbras.
- Model: PHD.
- Power: 06 KVA.
- 220 V input.
- Output 110 V + 110 V.
- Frequency 60 Hz.... |
|
|
 |
Brand: Bray Controls, Flow Tec
- Flow control system.
- Double acting pneumatic actuator.
- Brand: Bray Controls.
- Maximum pressure: 140 psi.
- ISO 5211/1 compliance.
- Valve with ball ring.
- Brand: Flow Tec.
- Model: Flow-Tek F-15 4 "CF8M.
- Stainless st... |
|
|
 |
Brand: Hebleimar
Industrial cooling tunnel for chocolate, biscuit and sweets.
Length of 12 meters with 01 station.
Width: 600 mm.
Brand: Hebleimar.... |
|
|
 |
Brand: Posimat
Positioner from plastic bottles.
Brand: Posimat.
Model: Master-20.
Serial: 8764-MXI.
Uses all kind of bottles either light or heavy, cylindrical, oval or asymmetrical, with short necks or even without a neck, as covers plans elements ... |
|
|
 |
Ribbon Blender Mixer
- Conveyor thread attached.
- With reducer and motor.
Literature: Approximately 200 L.... |
|
|
 |
Brand: Indumak
Components: Atos, Festo, Siemens, WEG
Vertical powder packer with helical dosing system
Brand: Indumak.
Model: MG 8000.
With thread, dosing system and format.
With panel.
System of vision Acts series interactive.
Inverters Weg CFW 08.
CLP Atos MPC 4004.
Servo driv... |
|
|
 |
Brand: Incal
Blender Ribbon Blender stainless steel 400 L
- Brand: Incal.
- Model: JAA INC 400.
- Material: Stainless steel.
- Capacity: 400 liters.
- Voltage: 380 three-phase.
- Components: 1 engine with 11 kW of power.
- General characteris... |
|
|
 |
Brand: Alfa Laval
Alfa Laval sanitary transfer pump
- Pontecia: 7.5 hp - 3 phases.
- Voltage: 220/380 V.
- A 19.1 / 11.1
- Hz 60
- 3,500 rpm... |
|
|
 |
Brand: Berliner Luft
- Exhaust fan, ventilation unit with double exhaust fan.
- Brand: Berliner Luft.
- Series: BBT.
- Model: BBT 160.
- Quantity: One unit.
- Excellent condition.
Cli... |
|
|
 |
Brand: Hebleimar
Hebleimar stainless steel knife / knife roller
- Brand: Hebleimar
- Material: Stainless steel
- Voltage: 220 V three-phase
- Components: 1 engine generating 7.2 KW of power
- General characteristics: Spacing between 30 mm rotary knives... |
|
|
 |
Brand: Fanem
- Fanem 345 climate chamber
- Stainless steel inner chamber
- Volume of 270 liters;
- Microprocessed control;
- Temperature: 10 ° to 75 ° C;
- Internal humidity controlled between 35% and 95%;
- Internal circulation of forced air;
... |
|
|
 |
Dryer Spray Dryer in stainless steel.
Drying capacity between 100 and 150 kg hour.
It has nozzle because it is high pressure.
It was used in the food industry.
Drying capacity between 100 and 150 kg hour.
Unbranded equipment was assemb... |
|
|
 |
Brand: Incal
Coated tank for baking and processing of chocolate, creams and sweets.
Brand: Incal.
Model: JAA 22.
Material of equipment: Stainless steel.
Working Pressure: 150 LBS / Pol².
Capacity: 200 liters.
Voltage: 220 three-phase.
Compone... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing.
Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally.
The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment.
Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial.
|
 |
| |
|
Plastic injection mold set
