|
|
|
| Automatic filling machine 8 nozzles Prymaxx |
|
Automatic linear filling machine 8 nozzles with return.
Brand: Primaxx.
Year: 2018.
Control by PLC and HMI touch screen frequency inverters.
With a high flow pump.
Automation of the set containing pneumatic bottle stop barriers.
Aluminum comb bottle aligner.
With presence sensors and a system for raising and lowering the pneumatic nozzles.
Structural cabin in 304 stainless steel square tube with brushed finish and polycarbonate protection cabin.
It has an industrialized balance tank in 316l stainless steel with a thickness of 2mm with automatic level control by lMT-100 ifm sensor.
6 meters linear conveyor belt with stainless steel sides with polypropylene chains, traction motor-reducer, adjustable support pedestals with a maximum height of 900mm from the floor, sides adjustable to the width of the bottles and side guides in aluminum coated with HDPE.
It has an automatic linear threader, linear toggle, fixed accumulation table, automatic lid positioner, stainless steel transfer pump with an approximate flow rate of 200 liters per minute.
Approximate capacity: 500ml to 5000ml.
Voltage: three-phase. |
Brand:
Prymaxx
|
|
|
|
|
|
Main suggestions:
|
|
 |
Brand: Prymaxx
Linear automatic filling machine 20 nozzles with return system.
Brand: Primaxx.
Approximate capacity: 1 liter to 5 liters.
Year: 2019.
With cabin enclosed in tempered glass and gear pump.
It has 02 dispensers.
01 balance tank with f... |
|
|
 |
Automatic liquid filling machine with 4 nozzles for bottles, jars, cups.
Chinese equipment.
Model: LT-4F.
Filling range: 5ml - 3500ml.
The equipment is packed.
Year: 11/2024.
Voltage: 220V single phase | 60hz | 0.5kw.
Applicable ... |
|
|
 |
Automatic rotary filling machine with 36 nozzles for bottles and glass jars.
For 600 ml glass bottles.... |
|
|
 |
Rotary automatic filling machine for soft drinks with 72 nozzles.
For manufacturing carbonated (carbonated) drinks.... |
|
|
 |
Brand: Mirainox
Line for manufacturing cleaning products.
Filling machine for liquids with two spouts.
-Stainless steel tank.
Approximate capacity: 800 liters.
With mixer with reduction.
Voltage: three phase.
- Automatic filling machine.
Manufacturer: M... |
|
|
 |
Brand: Vinox, Zegla
Gravimetric rotary filling machine in stainless steel with cabin.
Filling machine with capper for 1-liter to 5-liter bottles, drums, and cans, depending on the height and width of the bottle.
Filling by gravimetric nozzles, with 8 nozzles.
W... |
|
|
 |
Brand: Y&G Packing Machinery
Liquid Filling and Screwing Machine Set consisting of the following equipment:
Semi-Automatic Pneumatic Liquid Filling Machine with two nozzles.
Manufacturer/Brand: Y&G Packing Machinery.
Model: YGF-YL-2.
Maximum dispensing volume: 250 ml... |
|
|
 |
Semi-automatic filling machine for liquids.
Condition: New in box.
Equipment with pedestal, without need of self-supporting table.
Dose up to 500 ml.
Stainless steel.
micrometric adjustment for dosage setting.
Accuracy at filling is... |
|
|
 |
Brand: Envase Mais, Fujinox, Marburg, Nelpas, Netzsch, Real
Complete line for filling bottles and jars.
Composed of:
– Bottle positioner.
Manufacturer | Brand: Fujinox.
Model: L - 300.
Year: 2014.
– 6 conveyor belts.
Manufacturer | Brand: Fujinox.
– Automatic labeling machine for cylin... |
|
|
 |
Brand: IMSB, Maqmundi
PET bottle filling line with bung capper, labeler, and accumulator table.
Comprises:
- Stainless steel rotary gravimetric filler with 16 nozzles.
With bung capper.
Manufacturer | Brand: IMSB / Rodopac.
Model: EGT8 16 / 4.
Approximat... |
|
|
 |
Brand: I.G. Máquinas
Automatic linear gravity filler with 6 nozzles.
With washer-rinser and capping screwer.
Manufacturer | Brand: I.G. Máquinas.
Model: I.G. 04.
Approximate capacity: up to 1,800 bottles per hour.
No need to change kits for different bottl... |
|
|
 |
Brand: KHS, Mojonnier, Sabroe, Schulz, Ziemann Liess
Complete line plant for the production of beer and soft drinks.
Line composed of:
Bottle washer.
Manufacturer: Ziemann-Liess / KHS.
With 32 positions.
Year: 1994.
With tank system.
Linear rinser for bottles.
Nominal production... |
|
|
 |
Brand: Prymaxx
2 semi-automatic stainless steel filling machine.
Brand: Primaxx.
Approximate capacity: 10 ml to 20 l.
Year: 2018.
With 3 stainless steel tips for adjustments, equipment composed of 2 dosing nozzles and gear pump.
Adjustments in touch ... |
|
|
 |
Brand: Brabeer
Stainless steel filling machine with 2 nozzles for beer bottles.
Includes the rinsing, filling and corking process for liquids.
Manufacturer: Brabeer.
Approximate capacity: 200 bottles per hour.*
* depending on the bottle, product, etc.
... |
|
|
 |
Brand: Imacal, Wada
Rotary filling with 12 automatic nozzles.
Brand: Wada, Imacal.
Model: Mr 12.
Double conveyor belt.
In stainless steel.
... |
|
|
 |
Benchtop filling machine for liquids and viscous products.
Dosing range between 10 and 320 ml.
Stainless steel equipment. For dosing products in jars, pots, tubes, bottles, among others, easy to operate and adjust dosage.
With automatic or p... |
|
|
 |
Benchtop filling machine for liquids and viscous products.
Dosing range between 2 and 130 ml (ideal 5 to 100 ml).
Stainless steel equipment.
For dosing products in jars, pots, tubes, bottles, among others, easy to operate and adjust dosage.
... |
|
|
 |
Benchtop filling machine for liquids.
Dosing range between 5 and 320 ml (ideal 10 to 250 ml).
Semi-automatic filling of liquid products.
Made of 304 stainless steel, it has a system composed of pneumatic pistons that do not come into contact... |
|
|
 |
Brand: TRUE
Linear gravimetric filling machine with 12 nozzles.
Manufacturer | brand: TRUE MAQUINAS IND. COM. LTDA.
Model: TEL 1001.
For bottles of: 140ml, 300ml, 500ml and 2 liters.
Lid: Screw.
Approximate estimated filling time:*
*Equipment dev... |
|
|
 |
Brand: Engafbras
Automatic rotary filling machine in stainless steel with 9 monobloc nozzles for liquids.
Liquid filling line with conveyor belts, container rinsing, filling, corking and capping.
Manufacturer/brand: Engafbras.
Approximate capacity: 2,500 lit... |
|
|
 |
Brand: Edward
Automatic rotary filling machine 20 nozzles with gravity filler and closing machine.
Brand: Edward.
Approximate capacity: 500 ml.
Year: 2019.
It has:
Dosage control via level.
01 central tank for feeding with level control.
01 li... |
|
|
 |
Brand: Prymaxx
Bench top filling machine for viscous/pasty products with 2 nozzles.
Brand: Primaxx.
It has a panel with automatic setup.... |
|
|
 |
Brand: Cetro
Linear automatic filling machine with 10 nozzles for liquids.
Manufacturer: Scepter.
Model: YT-10T-1000ml.
Year: 2020.
Approximate filling volume: from 1000 to 5000ml.
Voltage: 220V.... |
|
|
 |
Brand: Narita
Components: Schneider
Automatic linear filling machine with 12 stainless steel spouts.
With screw capper.
Manufacturer: Narita.
Model: NT 12.
Year: 2011.
Bottle volume: 1 liter to 3 liters.
Approximate productivity: up to 3000 vials / hour.
With gravi... |
|
|
 |
Brand: Alpina, APV, Ariete, Baopack, Flowmack, Gotesp, Limaq, Tonelli
Automatic line for the production of softened cookies, stuffed and donuts.
Production: 2,000 kg per hour.
This line has already produced a reference product.
Gas thermal cycle oven with 4 furnaces.
Italian filler with 4 lanes multiplied t... |
Others suggested equipment for you:
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
Sigma G.Mazzoni stainless steel mixer.
With control panel and automatic extrusion.
Reinforced walls.
Production 175 kg of base mass, was used to mix soaps masses, due to its strength, the equipment is reinforced, including against high quali... |
|
|
 |
Brand: Edward
Linear filling 6 stainless steel nozzles for:
Pasty and Liquid oils.
Filling machine can fill gel alcohol
2000 bottles Capacity/hour with 6 600 ml volumetric cylinder.
Pneumatic reservoir for 50 liters in stainless steel Mark Edwards.
... |
|
|
 |
Brand: Tirelli
Imported Italian bottling line, threading and labelling, consisting of:
-stainless steel pneumatic linear Tirelli Filling with 4 nozzles.
Model: GVJA.
-Rosqueadora stainless steel bottles, flasks for pneumatic Tirelli.
Model: NEBEL 2 t.... |
|
|
 |
Brand: Ima, Tecmar
Components: Adam, Allen-Bradley, Emerson, Gaynor, Lineartec, Schneider, WEG
Sachet with 12 ways.
Stick sachet filling machine.
Manufacturer brand: Tecmar IMA group.
Production: 50 g.p.m* (*these values vary according to the density and granulometry of the product, production may drop).
Hours of use and strokes: C... |
|
|
 |
Brand: Donar, MVL
Components: WEG
With vibrating chute feeder for solid products.
Presence sensor for container packaging, moved by conveyor belt with talisca.
The equipment has two stainless steel silos, each silo has a scale/load cell and a CLP itself.
CLP brand GTA.
... |
|
|
 |
Brand: Indumak
Manufacturer-Indumak.
time-6 years.
average production-08 to 10 products per minute.
packages that used-10 kg/15 kg/25 kg.
bagged product-animal feed with density 350 g/l to 450 g/l
-
Description the packinghouse PG 25 is offered for hi... |
|
|
 |
Brand: Meca
Saches sealer
electronic welding machine (radio frequency)-semi automatic box
Manufacturer: Mecca.
Saddle sachets in PVC for honey, sweet milk, olive oil and what most imagine.
1-equipment application.
electronic welding machines sachet, ... |
|
|
 |
Brand: Wada
Linear piston filling Wada.
With 4 Pistons.
Filling machine can fill gel alcohol
Conveyor
Duo gravity Filling.
Mark-Wada.
Makes packages of 20 ml to 5000 ml.... |
|
|
 |
Brand: Boato Pack
Boato Pack Tornado 8.
Italian Machine.
Sachet filling machine for powder, like sugar, SPLENDA and similar products.
Continuous system with screw feeder, complete machine in stainless steel.
Brand: Rumor Pack
Model: Tornado 8.
... |
|
|
 |
Brand: Cacautec, Elpack
Line for the production of gingerbread, composed by:
-Metering with 2 options of nozzles, with adjustable volume (Pneumatic). Manufactured in 2014.
-Flow Pack Packaging 80 ELPACK packaging brand per minute and with numerous adjustments of packagi... |
|
|
 |
Brand: Km
- Electropneumatic Batoqueira
- Brand: Km machines.
- Model: (BA002)
- Made of stainless steel. Semiautomatic equipment, allows pressure adjustment, has counter parts, column with height
adjustable.
- Machine of easy handling and low ... |
|
|
 |
Brand: Bonsucesso
- Capacity: 1500 l of mixer and 500 liters of silo approximately.
- The blade mixer is coupled to a lower outlet mezzanine, or silo of the product,
For intermediate transport and storage (silo) for threads
Carriers.
- The equipment has mo... |
|
|
 |
Brand: Nocelli
- Lineariser with 6 nozzles.
- Machine built in stainless steel.
- Structure in good condition.
- Brand: Nocelli.... |
|
|
 |
Sigma mixer to 500 litres, waking up thread, stainless steel inner pot, arm sigma in stainless steel, threaded and external structure in carbon steel.
Note: video of the equipment working.
... |
|
|
 |
Brand: Imaaj
Used to melt Imaaj brand. (Jamapará automation and machinery industry)
Dosing machine for pastes.
DSV Model.
Filling machine can fill gel alcohol
... |
|
|
 |
Brand: Milainox
Filler dosing liquids in glasses, flasks and pots and semi pasty.
Brand: Milanox.
Model: M22.
Year: 2010
Approximate capacity: 2,000 cups per hour.... |
|
|
 |
Brand: IMSB, Rodopac
Tampador automatic.
Model-TSB 25.6.
Manufacturer-IMSB.
Equipment designed for use in process lines where there is a need for automation in the closing of the plastic bottles, glass or metal. Developed to close bottles with various models of c... |
|
|
 |
Brand: Nocelli, Serac
- Lineariser with 6 nozzles.
- Machine built in stainless steel.
- Structure in good condition.... |
|
|
 |
Brand: Tirelli
Labelling machine for bottles, Cologne and perfumes.
Brand: Tirelli.
Model: Delta.
Year: 1999.
Height: 2.00 m.
Width: 1.80 meters.
Length: 2.40 metres.
Weight: approx. 300 kg.... |
|
|
 |
Brand: Zolimaq
Linear automatic filling machine.
Brand: Zolimaq.
Built in stainless steel.
With 6 dosing nozzles.
Accompanies another set of 6 nozzles for smaller products.
Filling machine with stainless steel centrifugal pump to pressurize the produ... |
|
|
 |
Brand: Serpack
Components: Festo
Filling continues Stand Up Pouch stainless.
Brand Name: Serpack.
Model: SPK 200.
For filling: Olives, meatballs and other.
Presentation of the package: Sache Stand Up Pouch.
Yield: 35 ppm.
Supply voltage: 220 V-60 Hz 3 F
pneumatic syste... |
|
|
 |
Brand: Nocelli, Serac
Gravity packer for liquids.
- Machine has 1 spout.
- Machine entirely built in stainless steel.
- Brand Serac.... |
|
|
 |
Brand: Dmom
Filling line for dairy dulce de leche and pasty products.
Filling machine, sealing and dater in linear tri-block system.
For cups pots jars.
Brand: Dmom.
Model: DMS 500 SA.
Voltage: 220 W.
With lung tank with tacho agitator.
Capa... |
|
|
 |
Brand: Indumak
Line for mixing and packing with ribbon blender and Indumak floor:
-Packer/trademark Indumak package.
Model: MG1000.
Excellent state of conservation.
Packing type solder pad and FP 1000 feeder of Indumak, for the dosing of powders and c... |
|
|
 |
Brand: Martinez taboada
Rinsers of vials and flasks.
Mrca: Martinez Taboada.
Makes up to 30 ml.
type Model. IFE 77.
Year. 1979.
the machine was being used all the time, is in a State of preservation as the machines of the perfume line.... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Camargo Industrial acts exclusively as an advertising platform. All information, photos, descriptions, conditions, and equipment compliance are the sole responsibility of the advertisers, and it is up to the buyers to verify their accuracy before purchasing. Camargo Industrial does not guarantee the accuracy, completeness, legal and technical availability of the advertised equipment.
Workplace safety with machinery: The platform does not perform inspections or certifications. The suitability of equipment to standards is the responsibility of sellers and buyers.
|
 |
| |
|
